Pictured below is the top rail of the door jam that MUST be designed as removable. Mine is a little crude as the removable aspect was not taken into consideration in the original design. However, mine works really well. The top rail (going out of the picture on the right) has a hollow 90 degree bend on each end that snaps over the corner of the kontainer sides. The entire container is snap together and nothing is screwed or rivited in construction of the kontainer itself. When the door swings open, the entire kontainer has a bit of sway. A top rail that firmly attaches to the front AND sides of the kontainer stiffens the entire structure.
You can click to go back to the numbered photographs, or you can go to the previous detail or you can go to the next detail photo.